WEEB LUG 8.0 - HARDWARE NOT INCLUDED

For Use With the Following:

SHUCO - EZ Flat Roof, EZ Ground Mount

T.R.A.-MAGE - Tegra

TERRAFIX - Solar Park

JAC PRODUCTS - Jac Rack

HES - Fast Rack

DP&W

The WEEB Lug consists of a WEEB (Washer, Electrical Equipment Bond), lay-in lug, and hardware. It is

used with one solid or stranded copper wire (6AWG to 14AWG), or two copper wires (10AWG to 12AWG)

to provide a continuous ground on roof or ground mounted solar systems. Unlike traditional lay-in lugs,

the WEEB Lug does not require surface preparation on rail or module to install. The WEEB Lug is

installed using a 1/4-20 stainless steel screw which tightens the WEEB, allowing the specialized teeth to

embed into anodized aluminum, galvanized steel, or any electrically conductive metal to establish a gas

tight electrical connection. The tin-plated Lug assures minimum contact resistance and protection against

corrosion. The copper wire is clamped by a 1/4-28 stainless steel screw, which is horizontal to the tang for

easy access when mounted under a PV module. The low profile of the WEEB Lug allows it to be installed

in a variety of positions and comes with hardware to mount it to a rail or through a 1/4 inch clearance hole.

Material: 304 stainless steel, tin-plated copper, outdoor rated