Yellow #10 AWG USE-2/RHH/RHW-2 Stranded CUBy
Yellow #10 AWG USE-2/RHH/RHW-2 Stranded CU
Model # 00036400177
* Standard length = 500ft Spool (custom lengths available upon request)
TYPE USE-2/RHH/RHW-2 copper conductor
Underwriters Laboratories Standards UL-44, UL-854
Federal Specification A-A-59544
NEMA WC70/ICEA S-95-658
NFPA 70: National Electrical Code (NEC)
UL 1685-FT4/IEEE 1202 (70,000 Btu/hr) Flame Test (1/0 AWG and larger)
ICEA T-29-520 (210,000 Btu/hr) Flame Test
NEMA RV4 2009
ARRA 2009; Section 1605 “Buy American” Compliant
Stranded conductors, uncoated copper per ASTM-B787 and ASTM-B8
Cross-linked polyethylene (XLPE) insulation per UL-854
Type USE-2 or RHH or RHW-2 copper conductors are suitable for use in conduit and raceways installed underground
in conduit, wet locations, and where condensation and moisture accumulations within the conduit do not exceed 90˚C.
Applications requiring direct burial are permitted for Type USE-2, RHH, RHW-2 per UL-854. For applications requiring Type
RHH or RHW-2, conductor temperatures shall not exceed 90˚C in wet or dry locations. Type USE -2 or RHH or RHW-2 is
permitted for 600 volt applications.
Rated VW-1. 10 AWG and larger rated for sunlight resistance on all colors. For 250 KCMIL and larger, sequential foot markings located every foot for easy measuring. For 1 AWG through 4/0 AWG, sequential foot markings on master reels
only unless otherwise specified. 1/0 AWG and larger are rated for cable tray use and comply with IEEE 1202/FT4 (70,000
Btu/hr) flame test. When used as RHH or RHW-2, cable also complies with ICEA T-29-520 (210,000 Btu/hr) flame test.
*8 AWG-2 AWG: 19/w is available by request.